A new roof usually comes with two separate promises: a manufacturer warranty that covers the materials, and a workmanship guarantee from the roofer that covers how those materials were fitted. The manufacturer pays out if a product is faulty; the roofer is responsible if the problem comes from poor installation. Knowing which is which, what neither of them covers, and what happens if your roofer goes out of business is the difference between a quick fix and an expensive argument.
This guide explains how roofing warranties work for UK homeowners, how insurance backed guarantees fill the biggest gap, the legal rights you have regardless of what the paperwork says, and the questions to ask before you sign a quote.
Manufacturer warranty vs workmanship guarantee at a glance
| Question | Manufacturer warranty | Roofer’s workmanship guarantee |
|---|---|---|
| Who provides it? | The company that made the tiles, slates, membrane, sheets or other products | The roofing contractor who installed the roof |
| What does it cover? | Defects in the materials themselves, such as premature cracking, delamination or a membrane failing early | Faults caused by installation, such as poor fixing, badly formed flashings, wrong laps or inadequate ventilation |
| Does it include labour? | Often not, or only partly; many cover replacement product only | Usually yes, because putting the work right is the point of the guarantee |
| Typical conditions | Correct installation to the maker’s instructions, sometimes by an approved installer, sometimes registration within a set period | Paying in full, no alterations by others, reasonable maintenance |
| Biggest weakness | Void if the product was fitted incorrectly | Worthless if the company stops trading, unless it is insurance backed |
How manufacturer warranties work
A manufacturer warranty is a promise about the product. If clay tiles start spalling years early, or a single ply membrane splits because of a manufacturing fault, the maker may replace the defective material. Warranty lengths vary widely between products and brands, from a few years on some accessories to several decades on certain tiles, slates and metal sheets, so always read the actual document rather than the headline figure on a brochure.
Product warranties vs system warranties
Some manufacturers offer a simple product warranty on individual items. Others offer a wider system warranty that covers a whole roof build up, for example tiles, underlay, battens, ridge and dry fix components, provided every part comes from the same manufacturer’s range. System warranties are generally more valuable because they reduce the chance of each supplier blaming another component, but they come with stricter conditions. Flat roof membrane systems in particular often require installation by a contractor the manufacturer has trained or approved, and some require the job to be registered or inspected.
The labour problem
The most common surprise is that many material warranties cover the cost of replacement product but not the scaffolding, stripping and refitting needed to swap it. On a roof, access and labour are usually the largest part of the bill, so a warranty that only supplies new tiles can be worth far less than it sounds. Check whether the wording says “materials only”, “pro rata” (the value reduces over time) or includes labour.
Why installation matters to the manufacturer
Every manufacturer warranty assumes the product was fitted in line with its installation instructions and relevant British Standards. If tiles were laid below their minimum pitch, fixed with the wrong nails or clips, or a membrane was bonded in the wrong conditions, the maker can reasonably refuse a claim. This is exactly why the second warranty, from your roofer, matters so much.
How workmanship guarantees work
A workmanship guarantee is the roofer’s written promise to return and put right defects caused by the way the job was done. If a valley leaks because the lead was dressed poorly, or slipped tiles appear because the fixing specification was ignored, this is the guarantee you call on. Lengths are set by each company. Ten years is common for full re-roofs carried out by established firms, while repairs often carry a much shorter guarantee or none at all.
A long workmanship guarantee signals that the contractor expects the job to last, but the length on its own tells you little. What matters is what the wording covers, what it excludes, and whether the company will still exist when you need it.
The weak spot: when the roofer stops trading
A company guarantee is only as good as the company. If your roofer goes into liquidation, retires or dies, a standard workmanship guarantee simply stops having anyone behind it. Roofing is a trade where small businesses come and go, so a ten year promise from a firm that closes in year three is effectively a three year promise.
Insurance backed guarantees: closing the gap
An insurance backed guarantee (IBG) is a separate insurance policy that sits behind the roofer’s own guarantee. If the contractor stops trading, for example through liquidation, administration, retirement or the death of the principals, the IBG keeps the work covered for the remainder of the guarantee period. Trade bodies and specialist providers offer these schemes; the Confederation of Roofing Contractors, for instance, offers its members an IBG that typically runs for ten years, covers new work and materials up to the contract value, and transfers to a new owner if the house is sold.
A few practical points apply to most IBGs:
- They are optional, not a legal requirement, and usually cost extra or are built into the price.
- They normally only pay out if the contractor no longer exists. While the firm is trading, you deal with the firm.
- They are often issued only once the job has been paid in full, so ask for the certificate on completion.
- Many exclude small repairs, coatings or work done by other trades on the roof.
For a full replacement, especially a flat roof where installation quality decides almost everything, asking for an IBG is one of the most sensible things you can do. Our guide to flat roof replacement covers the materials and build ups where installation errors are most costly.
Your legal rights sit underneath any warranty
Even without a written guarantee, you are not unprotected. Under the Consumer Rights Act 2015, a trader supplying a service to a consumer must carry it out with reasonable care and skill, and any materials supplied must be of satisfactory quality and fit for purpose. If the work falls short, you are entitled to ask the trader to put it right within a reasonable time and without significant inconvenience, and if that is impossible or does not happen, you may be entitled to a price reduction.
In England and Wales, the general time limit for bringing a claim for breach of contract is six years under the Limitation Act 1980; Scotland uses a different prescription period. A written guarantee adds to these rights; it cannot take them away. If a guarantee claim stalls, contact the trader in writing, keep photos and dated records, and consider whether the roofer belongs to a trade body or scheme with a complaints or dispute process. For larger sums, take independent legal advice.
Building Regulations and competent person schemes
Replacing a large part of a roof can count as building work that must meet the Building Regulations, including thermal performance requirements. Roofers registered with a government authorised competent person scheme, such as the NFRC’s CompetentRoofer scheme in England and Wales, can self-certify qualifying re-roofing work instead of you applying to building control. Keep the compliance certificate with your warranty paperwork, because buyers’ solicitors often ask for it when you sell.
What roofing warranties usually do not cover
Neither type of warranty is a substitute for buildings insurance. Typical exclusions include:
- Storm and weather damage beyond the conditions the roof was designed for, plus falling trees and branches. These are normally buildings insurance claims.
- Normal wear and weathering, such as moss growth, colour fading and gradual ageing of materials.
- Lack of maintenance, including blocked gutters and outlets that cause water to back up.
- Damage by others, such as satellite installers, solar fitters or chimney sweeps walking on or drilling through the roof.
- Alterations made after installation, including new roof windows or vents fitted by a different contractor.
- Existing parts of the structure that were not included in the job, for example original rafters or a chimney stack that was only repointed.
How to keep your roofing warranties valid
- Keep every document: the quote, invoice, specification, manufacturer warranty, workmanship guarantee, IBG certificate and any Building Regulations certificate.
- Register product warranties if the manufacturer asks you to, and note any deadline.
- Clear gutters and outlets at least once a year, more often under trees.
- Use the original installer for repairs during the guarantee period where possible, or check first whether another trader’s work would affect cover.
- Report problems quickly and in writing. Many guarantees require prompt notification, and early leaks cause far less damage.
Questions to ask before you sign a roofing quote
- How long is your workmanship guarantee, and can I see the wording before I agree?
- Is it insurance backed, and who provides the insurance?
- Which manufacturer warranty applies, is it a product or system warranty, and does it include labour?
- Are you an approved installer for the materials you are quoting?
- Will the work need Building Regulations sign off, and will you handle it?
- Is the guarantee transferable if I sell the house?
Comparing quotes on these points is more useful than comparing headline prices. If you are weighing materials, our guide to how much a metal roof costs explains how product choice affects both price and warranty terms, and our article on choosing a residential roofing contractor covers the wider checks worth making.
About the contributor
This guide was contributed by RoofElite, a roofing company in Florida offering metal, shingle, tile and flat roofing as roofers in Wesley Chapel FL. The core principle is the same on both sides of the Atlantic: materials and workmanship are covered separately, so a roof is only well protected when both promises are clear, in writing and backed by someone who will still be around. The legal details above apply to UK homeowners.
Frequently asked questions
Does a roofing warranty cover leaks?
It depends on the cause. A leak from faulty materials falls under the manufacturer warranty, a leak from poor fitting falls under the roofer’s workmanship guarantee, and a leak from storm damage or blocked gutters is usually excluded and may be a buildings insurance matter.
What is the difference between a roofing warranty and a guarantee?
In everyday use the words overlap. In roofing, the manufacturer’s promise about its products is usually called a warranty, while the contractor’s promise about the installation is usually called a workmanship guarantee. Both add to your legal rights under the Consumer Rights Act 2015.
What happens to my roof guarantee if the roofer goes out of business?
A standard company guarantee ends with the company. An insurance backed guarantee keeps the work covered for the rest of the guarantee period if the contractor stops trading, which is why it is worth asking for one on larger jobs.
How long should a roofing workmanship guarantee be?
There is no fixed rule. Ten years is common for full re-roofs by established firms, while repairs often carry a shorter guarantee. The wording, exclusions and whether it is insurance backed matter more than the number of years.
Can I transfer a roofing warranty when I sell my house?
Many insurance backed guarantees and some manufacturer warranties transfer to the new owner, but not all do. Check the wording and keep every certificate, because buyers’ solicitors often ask for them.






